HURRICANETM
Degreaser and Cleaner
|
Hurricane is a heavy-duty alkaline cleaner and degreaser formulated especially for spray washers. It may be automatically metered into the wash stage for an economical operation. This product is a low foaming, free rinsing detergent designed to remove dirt, grease, oil, and processing lubricants. It may be used on most metals including aluminum, steel, iron, stainless steel, and cast iron.
Hurricane contains a rust inhibitor to prevent flash rusting. It may be used as a solvent substitute in parts washers as it is 100% active and contains no fillers. For normal cleaning use 1 gallon in 50 gallons of water. Certain pressure sprayers dilute cleaner automatically, so follow equipment manufacturers directions for dilution procedures.
|
ONESTEPTM
Neutral pH Metal Cleaner
| One Step is an environmentally safe, neutral pH concentrated detergent suitable for cleaning all types of metal surfaces with no special disposal requirements. It contains a variety of degreasing agents designed to remove dust, glove prints, and other soils found in manufacturing plants. One Step is a low foaming detergent specifically formulated for cleaning metal parts prior to painting. When properly used, ferrous metals can be washed and dried without flash rust. One Step is suitable for use with metering systems used in high-pressure washers. Contains degreasing agents to remove dust, glove prints, and other soils found in a manufacturing plant.
For best results use in a high pressure hot water system without a rinse. Wash part thoroughly and let dry.
|
FERROSPRAYTM
Low Foaming
High Alkaline Cleaner
| Ferro-Spray is a low foaming blend of liquid caustics, surfactants and buffering agents. This highly concentrated blend makes Ferro-Spray the spray cleaner of choice for the metal fabricating industry. This product is ideal for cleaning steel or ferrous metal parts in the first stage of a five stage phosphatizing wash system. Ferro-Spray may be used as an engine block or steel parts spray wash in cabinet type washers. Be sure to use a rust inhibitor as it does not have rust inhibition properties. It is safe to use on chrome, nickel and stainless steel, and is biodegradable. Absolutely do not use on aluminum or cuprous metals. Use at 0.5% to 3.0% by volume of water, depending on severity of soils to be cleaned.
|
|